Lastomerric Bearings are used in engineering simulation of bridge designing job. Single hose length of these bearings ranges between 6m to12 m. Square in appearance, these can endure -10 degree C to 70 degree C operating temperature. Developed from rubber, Lastomerric Bearings have 1.35 density. Compression set temperature of these products is 100 degree C for 24hours. Up to 25% compression strength, 400% elongation at break, 55 to 65 shore A hardness range and 17.0MPa tensile strength are the key aspects of these products.
![]() |
SCON INFRASTRUCTURE
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |